Engine Treatment / TRANSMISSION TREATMENT
Customer Feedback
After apply LUCO Engine Treatment Gold, Customers feedback
ZEROONE 2022 MOTORSPORT SHOWCASE
ZEROONE 2022 MOTORSPORT SHOWCASE
Customer Feedback
Let's listen to the results of customers @Fendi after using LUCO ENGINE TREATMENT OIL +
.png/:/cr=t:0%25,l:0%25,w:100%25,h:100%25/rs=w:1209,h:1209,cg:true)
ENGINE TREATMENT GOLD 100% CONCENTRATE
TYPICAL CHARACTERISTICS:
LUCO ENGINE TREATMENT GOLD is an outstanding metal treatment for engine components that treats the surface of the metal to form a tough low friction shield. The tough low friction shield is able to withstand 5 times more load, pressure and friction as compared to conventional or normal engine oil, oil treatment and other form of engine treatments. It starts to provide lubrications where engine oil leaves off, by conditioning and penetrating the metal of your engine, not the oil. This is accomplished by smoothing the microscopic irregularities, cracks and points of uneven wear on the surface of bearings, pushrods, lifters, the crank and cam shafts. All internal moving parts that oil is pumped to is conditioned with a smooth, oiled surface which is more slippery and creates less friction than a non-oiled surface.
The damaging amounts and effects of friction, heat build up and wear are significantly reduced which extends component service life and lessens maintenance costs and down time.
LUCO ENGINE TREATMENT GOLD is exclusively formulated to blend with petroleum and synthetic oils, gear lubes, transmission fluids and grease. It contains no solids to retard penetration and will not cause any material build up or change even the finest of machine tolerances.
Used in conjunction with LUCO ENGINE TREATMENT GOLD and other LUCO fine products, your vehicle engine will perform at peak levels while generating the benefits of fuel savings to you.
BENEFITS & FEATURES
- Protection from wear between 5 times as compared to normal lubricants
- Improves fuel mileage
- Reduces dirty sludge, hard varnish & wear deposits formation
- Prolongs the life of the engine, transmission, gear box and differential
- Protects the moving metal parts against heat and friction
- Increases acceleration, horsepower, torque and performance
- Penetrates the metal surface to form a polished shield (low friction shield) that reduces friction
- Engine and engine components is cooler, cleaner, smoother and quiet
Luco engine treatment gold + load test
Application for Vehicles :
Automotive (Full range CC) Crankcase / Engine
Generally , add 120ml for vehicles using 4 litres engine oil & add 200ml for above 4 to 7 litres engine oil. Apply every 25,000km or every 6 months, whichever come first
2 & 4 Stroke Motorcycle Engine:
Generally , add 50ml for per ½ to 1.5 litres engine oil. Apply every 20,000km or every 6 months, whichever come first
Transmission (automatic & manual), Gear Box Steering Box
Generally , add 50ml for per 1 litre engine oil. Apply every 6 months
Luco Engine Treatment Oil street interview
Luco Engine Treatment Oil street interview
Application for Industries
Tractor, Bulldozer, Crane, Lorry, Truck, Marine Crankcase/Engine:
Generally , add 50ml for per 1 litre engine oil. Apply every 20,000km or every 6 months, whichever come first.
Gear Box, Speed Reducer, Hydraulic System, Chain Grease, Pneumatic Equipment, Air compressor, Fire Arm, Generators, etc:
Generally , add 50ml for per 1 litre engine oil. Apply every 6 months
ISO Certificate
